Removal, installation and cleaning of peristaltic pump hose

Number of hits:11742017-01-06 08:57:28　Sources: http://www.journeypump.com/jsfw/n45.html

Now on the market a number of production and production of peristaltic pump boom, and the cause of this factor is the industry, chemical industry, environmental protection, testing and other convenience, the use of peristaltic pump more and more places. Therefore, the quality of peristaltic pump also has some problems. Peristaltic pump problems, the need for maintenance, cleaning, removal and installation of maintenance. Here to explain the peristaltic pump hose removal, installation.

Removal, installation and cleaning of peristaltic pump hose

Removal and installation of peristaltic pump: peristaltic pump medium flowing in the peristaltic pump tube and peristaltic pump hose can only for cleaning, and the installation and removal of peristaltic pump hose are relatively simple, as long as to move the motor, can complete the installation and disassembly operation. Peristaltic pump delivery medium is not in contact with the pump body, which is conducive to the delivery of some of the metal corrosive medium. At the same time, for the peristaltic pump motor after the speed reducer, the speed is not high, generally the maximum speed of not more than 165 RPM / min, and can adopt manual control and frequency control in the selection of the motor, so as to better control flow. Peristaltic pump hose as a positive displacement pump, the flow rate is generally in the range of 0.15-40m3/h, its flow and speed is a constant linear relationship, that is, the output speed of the driving device is a certain value. Due to the limitation of the peristaltic pump in the structure and material of the peristaltic pump speed is too high is not easy, the pressure is not easy too large, generally in the 2-4bar. Therefore, according to different process requirements, the configuration of different types of hose pump is particularly important.